Wamsler W2-50, Instructions For Installation And Use Manual

Page: 35 / 108

35
2.2 Combustion airflow settings
The settings must always be as shown.
Fuel
Primary
airflow
setting
Start damper
setting
Secondary
airflow
setting
Combusti
on
duration
in hrs
Lighting -
Firewood
Nominal
heat load
approx. 1
Lignite briquettes
Nominal
heat load
approx. 2
Lignite briquettes
Long-term
heating approx.
12
Not in use: do not add any
more fuel
-
Table 2
3. Use
3.1 Controls for use and settings
3.1.1 Performance Regulator
The rate of combustion and therefore the heat delivered
by the stove are determined by the amount of air for
combustion air flowing under the grid. This primary air
supply is set using the performance regulator control.
1 -
Closed
2 - Firewood
3 - Lignite
3.1.2
Secondary air control / Air - logic
The secondary air regulator is on the inside of the frame,
behind the fire door. Choose the setting for the fuel.
1 -
Firewood
2 - Lignite