19
308.708.8185 | [email protected] | Rev. 08/21
PREPARATION & SET-UP
GAUGE WHEEL TIRE INFLATION
Gauge wheels inflated to the proper air pressure is an important factor in getting the best performance out
of your Watermizer while increasing the longevity of the life of your gauge wheels.
Underinflation can damage the tire and decrease the life expectancy of your gauge wheel.
Initial tire pressure should be set at 30 PSI for your Watermizer gauge wheels.
If the tire buckles or wrinkles, the air pressure must be increased so the sidewalls remain smooth while
operating.
NOTE: DO NOT OVERINFLATE TIRES
Check air pressure every two to three weeks and inflate when needed to prevent buckling or wrinkling
of the tire.
It is recommended that all wheel nuts be checked for tightness after first day of use. Wheel nuts should
be tightened to 90ft/lbs. Check periodically to be sure the wheel nuts are tight. Paint chipping or rust
can cause the wheel to become loose.
Valve Stem
Wheel Nut
