Installation
29
Waltron User Manual 101-042-B.1
3049 Ethylene Glycol Analyzer
3.7
REAGENT INFORMATION
The Waltron 3049 Ethylene Glycol Analyzer uses 3 reagents for the colorimetric measurement.
Reagent 1: Periodic Acid Reagent
Reagent 2: Potassium Hydroxide Reagent
Reagent 3: Potassium Persulfate Reagent
Reagent 4: Purpald Color Reagent
3.8
REAGENT HOLDING BRACKET
Use the drawing below to mount the reagent bracket below the analyzer.
NOTE:
Mount the bracket below the analyzer so that the base of
the bracket is at least 14 inches (40 cm) below the analyzer,
but no more than 30 inches (75 cm) below the analyzer. If
space is limited, the reagent shelf can be mounted to either
side of the analyzer up to the limit of the tubing length from
the pumps.
Figure 3.4: Mounting schematics for the reagent holding bracket.
19.50” (496 mm)
Ø 0.48
”
(12 mm)
1.0
” (25 mm)
7.00
”
(178 mm)
4.00
”
(102 mm)
11.50
” (292 mm)