32
NOTICE
Please note that the unit must generally be equipped with two sufficiently charged, com
-
patible batteries for battery operation. Operation with only one battery is not possible!
7.2 Power supply via mains current - operation with mains adapter
• Remove any mounted batteries before mains operation (see section 7.1).
• Switch the unit off at the ON/OFF switch (6) to <OFF>.
• Plug the round plug of the supplied power supply unit (15) into the power connection socket
(9) of the ring light marked <DC 15V>.
• Connect the power connection cable (16) to the power supply unit.
• Connect the power supply unit to the socket of the local mains supply (AC 100-240V/50-60 Hz).
• Set the ON/OFF switch (6) to <DC>.
• The unit is ready for use.
• Switch off the luminaire after use with the ON/OFF switch (6)
NOTICE
Compare local power supply with the connection values of the unit. If the values do not
match, please contact [email protected].
NOTICE
After use, disconnect the unit from the local power supply by pulling out the mains plug.
NOTICE
Only connect the power supply unit to a protective earthed socket.