18
WDC200-NX Electronic Water Management.
Revision-2
7.3 Configuration Settings
Figure 5. Configuration view
Hold the
button for 3 seconds to enter the configurations menu screen. From
here the device settings can be modified. Use the
and
buttons to highlight the
desired submenu item (
)
or setting item ( ). Use
to enter a submenu or edit a
setting, and
to go back a menu level or cancel a setting edit. The current position
in the menu tree can be seen at the top of the screen. For a description of the menu
and settings please see the
Error! Reference source not found.
section.
After a minute of inactivity the Configuration Settings screen will close and change to
the Notifications screen. If a setting editor is open when this occurs the editor will be
cancelled and the setting will not saved.
7.4 Quick Functions
Figure 6. Quick functions view
Hold the
button for 3 seconds to enter the quick functions menu screen. Quick
functions can be either state functions which toggle on
and off
, or event
functions
.
