background image

2.  Safety

2.1  Safety Alert Symbol

This Safety Alert Symbol means: 

ATTENTION! BE ALERT! 
YOUR SAFETY IS INVOLVED!

The Safety Alert Symbol identifies important safety messages 
on the Wallenstein Wood Processor and in the manual. 

When you see this symbol, be alert to the possibility of 
personal injury or death. Follow the instructions in the safety 
message.

2.2  Signal Words

The signal words 

DANGER

WARNING

 and 

CAUTION

 determine 

the seriousness level of the warning messages in this manual. 
The appropriate signal word for each message in this manual 
has been selected using the following guidelines:

DANGER –

Indicates an imminently hazardous situation that, if not avoided, 

will

 result in death or serious injury. This signal word is to be 

limited to the most extreme situations typically for machine 
components which, for functional purposes, cannot be guarded.

WARNING –

Indicates a potentially hazardous situation that, if not avoided, 

could

 result in death or serious injury, and includes hazards that 

are exposed when guards are removed. It may also be used to 
alert against unsafe practices.

CAUTION –

Indicates a potentially hazardous situation that, if not avoided, 

may

 result in minor or moderate injury. It may also be used to 

alert against unsafe practices.

IMPORTANT

 – To avoid confusing equipment protection with 

personal safety messages, a signal word IMPORTANT indicates 
a situation that if not avoided, could result in damage to the 
machine.

2.3  Why SAFETY is important

Three Big Reasons:

• 

Accidents Disable and Kill

• 

Accidents Cost

• 

Accidents Can Be Avoided

The policy of Wallenstein Equipment Inc. is to produce products 
that are safe and reliable. However, even when using well-
engineered equipment, there is always an element of risk. To 
minimize the risks and always promote safety, this section of 
the operator’s manual details safety rules that must always be 
followed and obeyed.

YOU

 are responsible for the SAFE operation and maintenance of 

your Wallenstein Trailer Wood splitter. 

YOU

 must ensure that you 

and anyone else who is going to use, maintain or work around 
the wood splitter be familiar with the operating and maintenance 
procedures and related

 

safety

 

information contained in this 

manual. This manual provides good safety practices that should 
be followed while using the Wallenstein trailer wood splitter. 

Remember, 

YOU

 are the key to safety. Good safety practices 

not only protect you but also the people around you. Make 
these practices a working part of your safety program. Be 
certain that 

EVERYONE

 using this equipment is familiar with the 

recommended use and maintenance procedures and follows all 
the safety precautions. Most accidents can be prevented. 

Do not risk injury or death by ignoring good safety practices. 

 Safety

Safety

7

WX470
Skid Steer Wood Splitter

Summary of Contents for WX470





































Reviews: