Wallenstein WP845, Operator'S Manual, Page: 59 / 72

9.4 Grease Points
• Use a hand-held grease gun for all greasing.
• Wipe each grease fitting with a clean cloth before greasing
to avoid injecting dirt and grit.
• Replace or repair broken fittings immediately.
• If a fitting does not take grease, remove and clean the
fitting thoroughly. Also, clean the lubricant passageway. If
required, replace the fitting.
Location
Grease Points
– Every 50 hours or annually
1 Lower RH and LH side of the log stabilizer
2 Upper RH and LH side of the log stabilizer
3 Winch (two locations)
4 Push block frame slide
5 Wedge height adjustment-arm bushing
Fig. 54 –
Grease points
01838
1
1
1
2
2
1
2
3
4
5
1
3
WP845 / WP875
Trailer Firewood Processor
Service and Maintenance
59