5.1.3 Starter-cord Handle
The rewind-start is an alternative to the ignition
switch. The primary way to start the engine is to
turn the ignition switch.
The engine includes a rewind-start. Grip the starter-cord handle
to pull the starter cord and start the engine.
01734
Fig. 9 –
Starter-cord handle
5.2 Hydraulic Controls
01151
2
1
3
Fig. 10 –
Hydraulic controls
1. Splitter cylinder extend
2. Splitter cylinder retract
3. Hydraulic winch control
5.2.1 Splitter Cylinder Controls
Splitter cylinder extend (1)
—extends the cylinder (the first half
of the cylinder auto cycle).
•
Push the lever down (into detent) to extend the cylinder.
When the cylinder is fully extended, the lever moves up to
the neutral position and stops the cylinder.
•
Push the lever up to manually retract the cylinder.
Splitter cylinder retract (2)
—retracts the cylinder (the second
half of the cylinder auto cycle).
•
Push the lever down (into detent) to retract the cylinder.
When the cylinder is fully retracted, the lever moves up to
the neutral position and stops the cylinder.
•
The lever has no function in the full up position.
5.2.2 Auto Cycle
Push the two splitter cylinder levers down (to the detent
position) to automatically cycle the splitter cylinder.
In
Auto Cycle
, the machine does the following:
1.
The splitter cylinder extends to split the log.
2.
When the cylinder is at the end of its stroke, the splitter
cylinder extend lever moves up to the neutral position (out
of detent).
3.
The cylinder begins to retract.
4.
When the cylinder is fully retracted, the splitter cylinder
retract lever moves up to the neutral position (out of detent)
and the cylinder stops.
WP845 / WP875
Trailer Firewood Processor
Controls
21
