background image

WE225, WE235

Trailer Wood Splitter

 Safety

Safety

9

2.3  Why is SAFETY important?

Three Big Reasons:

• 

Accidents Disable and Kill

• 

Accidents Cost

• 

Accidents Can Be Avoided

The policy of Wallenstein Equipment Inc. is to produce 

products that are safe and reliable. However, even when 

using well-engineered equipment, there is always an 

element of risk. To minimize the risks and promote safety 

at all times, this section of the operator’s manual details a 

number of safety rules that must always be followed and 

obeyed.

YOU

 are responsible for the SAFE operation and 

maintenance of your Wallenstein Trailer Wood Splitter. 

YOU

 must ensure that you and anyone else who is going 

to use, maintain or work around the wood splitter be 

familiar with the operating and maintenance procedures 

and related

 

safety

 

information contained in this manual. 

This manual provides good safety practices that should 

be followed while using the wood splitter. 

Remember, 

YOU

 are the key to safety. Good safety 

practices not only protect you but also the people 

around you. Make these practices a working part of 

your safety program. Be certain that 

EVERYONE

 using 

this equipment is familiar with the recommended use 

and maintenance procedures and follows all the safety 

precautions. 

2.4  Safety Rules

•  DO 

give operating instructions to operators or 

employees before allowing them to operate the 

machine, and REVIEW annually thereafter.

•  DO

 read and understand ALL 

Safety and Operating instructions 

in the manual and follow them. 

The most important safety device 

on this equipment is a SAFE 

operator. 

•  DO

 review safety related items annually with 

all personnel who are operating the machine or 

performing maintenance.

•  DO

 wear appropriate Personal Protective 

Equipment (PPE). The suggested equipment 

includes but is not limited to the following:

  - Hearing Protection
  - Protective glasses, goggles or face shield
  - Heavy work gloves
  - Protective shoes  with slip resistant soles

 

•  DO

 have a first-aid kit available 

for use should the need arise and 

know how to use it. 

•  DO

 read and understand all safety signs located 

on the machine before operating, servicing, 

adjusting, or cleaning.

•  DO

 inspect and secure all guards before starting.

•  DO 

check engine intake and exhaust. Make 

sure they are clear of debris prior to starting the 

machine.

•  DO

 have a fire extinguisher available for 

use should the need arise. Know how to 

use it.

•  DO

 think SAFETY! Work SAFELY!

•  DO NOT

 touch hot engine parts, muffler cover, 

hydraulic hoses, engine body, engine oil, and so on 

during operation or if the engine was recently shut 

off. Contact may cause burns.

•  DO NOT 

expect a person who has not read and 

understood all operation and safety instructions 

to use the machine. An untrained operator is 

not qualified and is exposed to possible serious 

injury or death. It is the owner's responsibility 

to make sure to the operator has familiarity and 

understanding of the machine.

•  DO NOT

 allow riders during transport.

•  DO NOT

 risk injury or death by ignoring good 

safety practices. 

Summary of Contents for WE225













































Reviews: