background image

QC620
Skid Digger

 Safety Signs

Safety

15

3.2  Safety Sign Explanations

1.  Service or Maintenance

Warning! 

Before performing any service 

or maintenance, make sure the skid 
digger is in the transport mode or the 
bucket is resting on the ground.

2.  Hydraulic System

Warning! 

Risk of serious injury from 

injection of high-pressure fluid. Never 
check for leaks with your hand or 
finger when system is pressurized. 
Use caution when removing panels 
or shields or disconnecting hydraulic 
connections.

3.  Buried Utilities

Warning! 

Risk of serious personal 

injury or damage to the skid digger. Be 
aware of the location of buried utilities 
(cable, pipes, electrical conduit). Have 
an underground utility locating/marking 
service survey the area before digging.

4.  Lock Pins

Warning! 

Make sure lock pins are 

securely latched before using the 
equipment. Failure to secure the pins 
could result in severe personal injury.

5.  Safety Awareness

Caution! 

Refer to the operator's manual. 

Read ALL operating instructions in the 
manual and learn the meaning of ALL 
safety signs on the machine. 

The best safety feature is an informed 
operator!

6.  Boom and Stabilizers

Warning!

 Risk of collision or pinching 

hazard in this area. Stay clear of moving 
boom and bucket.

7.  Personal Protective Equipment

Caution! 

Always wear appropriate PPE 

when using this machine. For example:

• A hard hat.
• Heavy gloves.
• Hearing protection.
• Protective footwear with steel 

toe and slip resistant soles.

• Protective glasses, goggles, or 

a face shield.

Summary of Contents for QC620





































Reviews: