1.1 Delivery Inspection Report
Wallenstein Wood Chipper
To activate the warranty, register your product at
.
This form must be completed by the dealer at the time of delivery, and then signed by the dealer and customer.
I have received the product manuals and been thoroughly
instructed about the care, adjustments, safe operation, and
applicable warranty policy.
Customer
Address
City, State/Province, ZIP/Postal Code
( )
Phone Number
Contact Name
Model
Serial Number
Delivery date
I have thoroughly instructed the customer about the equipment
care, adjustments, safe operation, applicable warranty policy,
and reviewed the manuals with them.
Dealer
Address
City, State/Province, ZIP/Postal Code
( )
Phone Number
Dealer Inspection Checklist
Rotor turns freely and the knife clearance is correct.
All cutting edges are sharp and in working condition.
Lock pins align and move freely.
Discharge chute and deflector move freely.
All belts are aligned and the tension is correct.
All fasteners are torqued to the correct specifications.
All grease points are lubricated.
Engine clutch and rotor sheave align.
Engine starts and operates, and fluid levels are correct.
Tire pressure is correct (see the tire sidewall).
Tires are in working condition.
Purchased accessories are included, if applicable.
Operator's Manual is in the storage tube.
Battery is fully charged.
The wire connections are in good condition and connected
correctly.
Safety Checks
All safety labels are applied and legible.
Operating and safety instructions were reviewed.
All guards and shields are installed, and the covers are
closed.
Emergency stop button functions correctly.
A retainer is installed through each hitch point.
Safety chains are on the ball-mount hitch.
Safety curtain is in the chipper hopper.
Trailer jack functions correctly.
Wheel lug nuts are torqued to the correct specification.
If purchased, all lights operate correctly (for example;
running, brake, turn signal, license plate).
Introduction
BXT36S
Wood Chipper
4
Summary of Contents for BXT36S
