Controls
BX52R, BX72R, BX102R
3 PH Roller-feed Chipper
36
Reset Defaults screen
P3 PULSE setup parameters can be returned to the factory
settings if desired.
•
From the
Settings
screen, use the Up or Down
arrows to navigate to
Reset Defaults
.
•
Pres
to reset all P3 settings back to factory default
values.
•
The next screen asks you to confirm the reset. Press the
key below to reject and
to accept.
•
If you press to cancel
,
the menu returns back to the
Settings
screen without changing your setup.
•
If you press
to accept, P3 reboots and resets all
settings to factory default values.
01234
SETTINGS
FEED SETTINGS
RESET DEFAULTS
DIAGNOSTICS
SELECT MACHINE
ENTER PASSWORD
01252
ARE YOU SURE YOU WANT TO RESET?
Fig. 47 –
Reset Defaults Screen
Diagnostics screen
The
Diagnostics
screen displays default settings, feed roller
direction, and electrical current supplied to the Forward solenoid
on the control valve.
Diagnostics
is typically used for debugging and testing
purposes by technicians. During operation, observe all machine
settings from this screen.
01254
NEUTRAL
ROTOR SPEED
VALVE CURRENT
MAX FEED
SPEED
MIN FEED
SPEED
FEED START
SPEED
MIN ROTOR
RPM
0%
0%
0000
0000
0000
0000
Fig. 48 –
Diagnostics Screen
01235
SETTINGS
FEED SETTINGS
RESET DEFAULTS
DIAGNOSTICS
SELECT MACHINE
ENTER PASSWORD
