Service and Maintenance
BXC34 / BXC34 Bundle
Wood Chipper
44
9.10 Tire Maintenance and Safety
WARNING!
Failure to follow the correct procedures when
mounting a tire on a wheel or rim can produce an
explosion, which may result in serious injury or
death. Do not attempt to mount a tire unless you
have the correct equipment and experience. Have
a qualified tire dealer or repair service perform
tire maintenance.
IMPORTANT! Replace worn tires with tires that meet the
original tire specifications. Never undersize tires.
•
Check the tire pressure on a regular basis. See the tire
sidewall for the correct pressure.
•
At a minimum, check the tire pressure after every 100
hours of operation or annually.
9.11 Wash the Machine
IMPORTANT! Using harsh chemicals can damage the
machine finish. Do not use gasoline, diesel fuel, or thinners
for cleaning.
IMPORTANT! A pressure washer can damage the machine's
product identification plate and make it unreadable. Do not
direct the spray from a pressure washer onto the product
identification plate.
IMPORTANT! A pressure washer can damage the bearings.
Do not direct the spray from a pressure washer directly onto
the bearings.
1.
Use a hose or pressure washer and mild detergent to
remove dust, dirt, and debris.
2.
Use a clean, soft cloth, that is dampened with water to
remove dirt from the product identification plate.
3.
Apply grease to the rotor bearings.
4.
Start the machine, let the engine run for a few minutes to
dry, and then stop the machine.
Summary of Contents for BXC34
Page 52: ...WallensteinEquipment com...
