Service and Maintenance
BXC34 / BXC34 Bundle
Wood Chipper
36
9.4 Grease Points
IMPORTANT! Do not over-grease the bearings. Too much
grease can cause the bearing seals to fail.
Look for this decal on the machine. It
indicates a grease point and the interval in
hours.
Apply one pump of grease to each rotor bearing every 100
hours of operation or annually.
•
Use a hand-held grease gun for all greasing. Apply one
pump per location.
•
Wipe each grease fitting with a clean cloth before greasing
to avoid injecting dirt and grit.
•
Replace or repair broken fittings immediately.
•
If a fitting does not take grease, remove and clean the
fitting thoroughly. Also, clean the lubricant passageway. If
required, replace the fitting.
Fig. 21 –
Grease points
02007
2
Summary of Contents for BXC34
Page 52: ...WallensteinEquipment com...