BXS Series
3PH Self-feed Chipper
Familiarization
15
4. Familiarization
4.1 To the New Operator or Owner
Wallenstein BXS Series Wood Chippers are designed to chip and
chop scrap lumber, small trees, brush, limbs and other wood
debris. The chipped material is fine enough to be composted or
used in a variety of ways.
It is the responsibility of the owner or operator to read this
manual and to train all other operators before they start
working with the machine. Follow all safety instructions
exactly. Safety is everyone's business. By following
recommended procedures, a safe working environment is
provided for the operator, bystanders and the area around
the work site. Untrained operators are not qualified to use the
machine.
Many features incorporated into this machine are the result of
suggestions made by customers like you. Read this manual
carefully to learn how to use the chipper safely and how to
set it to provide maximum field efficiency. By following these
instructions in conjunction with a good maintenance program,
your BX-S Wood Chipper will provide many years of trouble-free
service.
IMPORTANT! Make sure all operators understand how to
place the machine in a Safe Condition before working with
this machine. See
4.2 Operator Orientation
IMPORTANT! The directions for left-hand, right-hand,
backward and forward mentioned throughout this manual
are determined when sitting in the tractor seat, facing the
direction of forward travel.
01332
Fig. 4 –
Direction of forward travel
