Operating Instructions
WXR720/L, WXR740/L
Trailer Wood Splitter
24
00616
2
1
Fig. 12 –
Engine Oil Level check
1. Oil Level Dipstick
2. Oil Filler
3. Low Level
4. Full Level
Refer to the engine owner's manual included in the manual
tube for further information on engine oils
.
6.6 Hydraulic Oil Level Check
Check hydraulic oil level every 40 hours or weekly.
Check with the machine parked on level ground and the engine
stopped.
The proper level is when the oil is visible at the full (upper)
mark on the dipstick.
00617
Fig. 13 –
Hydraulic Tank Oil Level Dipstick
IMPORTANT! Do not operate machine if oil level is not
visible on the dipstick. Damage to the pump and other
components can occur.
Do not overfill the tank past the full mark.
IMPORTANT! Always check oil levels after changing filters
or servicing hydraulic components.
IMPORTANT! Hydraulic oil quality should be inspected
every 40 hours. If the oil is dirty or smells burnt, it should be
replaced.
IMPORTANT! Be aware of high oil temperatures.
Temperatures higher than 180 °F (82 °C) could cause seal
damage and degrade oil quality.
Summary of Contents for 720124
Page 44: ...www wallensteinequipment com...
