Safety
WXR720/L, WXR740/L
Trailer Wood Splitter
Safety
10
2.5 Equipment Safety Guidelines
Always place the machine in a
Safe Condition
before
performing any service work, maintenance procedures,
or storage preparation.
SAFE CONDITION
•
Shut off engine.
•
Make sure all moving parts have stopped.
•
Disconnect battery ground (-) cable.
•
Block or chock wheels.
1.
When two or more workers are present, only one
worker should be designated as the machine
operator and loader.
A potentially dangerous
condition arises when the worker loading the
machine does not control the hydraulic ram.
A worker's hand may be pinched or crushed if the
ram has been activated during loading.
2.
Never use equipment with safety shields removed.
Keep all shields in place. If shield removal
becomes necessary for repairs, reinstall the shield
prior to use.
3.
Replace any safety sign or instruction sign that is
not readable or is missing. Location of safety signs
is indicated in this manual.
4.
Do not allow anyone other than a responsible,
properly trained and physically able person to
operate this machine. This equipment is dangerous
to children and persons unfamiliar with its
operation.
5.
Do not modify the equipment in any way.
Unauthorized modification may result in serious
injury or death and may impair the function and life
of the equipment.
6.
Never exceed the limits of the machine. If its ability
to do the job or to do it safely is in question—
STOP IMMEDIATELY!
2.6 Safety Training
1.
The best safety feature is an
informed, careful operator—we
ask you be that kind of operator.
It is the operator's responsibility
to read, understand and follow
ALL safety and operation
instructions in the manual.
2.
Train all new personnel and review instruc tions
frequently with existing workers. Only properly
trained and physically able operators should
use this equipment.
A person who has not
read and understood all operation and safety
instructions is not qualified to use the machine.
Untrained operators expose themselves and
bystanders to possible serious injury or death. If
elderly people are assisting with the work, their
physical limitations need to be recognized and
accommodated.
3.
Learn the controls and how to stop the machine
quickly in an emergency.
4.
If this machine is loaned or rented, it is the
machine owner's responsibility to make certain that
every operator:
•
Reads and understands the owner's manual
• Is instructed in safe and proper use of the
equipment
•
Understands and knows how to perform the
Safe Condition procedure
2.7 Transport Safety
1.
Comply with local laws governing safety and
transporting of machinery on public roads.
2.
Do not exceed 50 mph (80 km/h) when towing
this machine. Slow down for rough terrain and
cornering.
3.
Do not transport or move the wood splitter with the
engine running.
4.
Be sure the trailer is hitched correctly to the towing
vehicle and a retainer is used through the hitch
mechanism.
5.
Always attach safety chains between the hitch and
the towing vehicle. Cross the chains underneath
the trailer tongue.
6.
Check wheel lugs and tighten if required. Inspect
rims for damage.
7.
Inspect tires for cuts or damage. Check tire
pressure and adjust if required.
8.
Ensure the stability jacks are raised and secured
with the latch pin.
9.
Make sure tow vehicle is fitted with the correct size
(2 in) towing ball.
10.
Make sure fuel and hydraulic tank caps are on tight
to prevent spills while transporting.
11.
Clean all debris off the splitter. Remove any tools
or other loose items.
Summary of Contents for 720123
Page 43: ......
Page 44: ...www wallensteinequipment com...