15
Insert the power output cables in their
connectors and tighten the screws one by
one in a sorted manner.
Place the Power board on the charger’s
body and secure it to the chargers body by
tightening the four screws.
3.
4.
Attaching the new Power Supply Unit
Get the new Power Supply unit and place it in on the
charger’s body.
1.
2.
Insert and tighten the four screws to secure the
Power Supply unit to the charger’s body.
Insert the cables that are connected to the
Power Supply unit. Use a screwdriver to press
the connector levers and then insert the
cable.
Insert the control pilot cable in the connector
by pressing the connector levers with a
screwdriver and then insert the cable.
5.
6.
Summary of Contents for PULSAR
Page 1: ...PULSAR Service Manual...
