11
Insert the cables that are connected to the
Power Supply unit. Use a screwdriver to press
the connector levers and then insert the
cable.
Get the front plastic cover and connect the
communications cable to the Power board.
Insert the control pilot cable in the connector
by pressing the connector levers with a
screwdriver and then insert the cable.
Insert the power input cables in their
connectors and tighten the screws one by
one in a sorted fashion.
3.
5.
4.
6.
Attaching the new Power board
Insert and tighten the four screws to secure the Power
board to the charger’s body.
1.
2.
Insert the power output cables in their connectors
and tighten the screws one by one in a sorted
manner.
Check that the power input cables are fixed properly.
Summary of Contents for PULSAR
Page 1: ...PULSAR Service Manual...
