Wallace Perimeter Security SPEEDGATE, Installation And Maintenance Manual

Page: 11 / 142

SPEEDGATE Installation and Maintenance Manual Revision 1 - MAY 2023
11
INSTALLATION AND COMMISSIONING CHECKLIST: SETTING GATE LIMITS
Installation and Commissioning Checklist: Setting Gate Limits
Complete Step Description
5.3.1
STEP ONE OF SETTING GATE LIMITS
Ensure internal setting is ON.
5.3.2 STEP TWO
5.3.2-A. Using the foil keypad buttons (UP arrow,
DOWN arrow, STOP button) which are
located to the right of the LCD display:
Press and hold UP arrow and STOP button
simultaneously.
5.3.2-B. On the LCD display there will be a description of the parameter on the top left, the
parameter number located on the bottom left and the parameter value located
on the bottom right.
5.3.2-C. Use the DOWN arrow to scroll down until
parameter number 999 is located. This
parameter is used to input the password
to enable accessing the parameters which
need to be changed.
5.3.2-D. At parameter 999 use the STOP button by
pressing it once to move the underscore
to the parameter value on the right.
5.3.2-E. Use the UP and DOWN arrows to scroll
to the master password. [4 is the Gate’s
Master Password. Call Wallace Perimeter
Technical Support at 1 (866) 300-1110 if a
password reset is needed.]