Alpha/Delta (Kinetic Operator) Installation and Maintenance Manual
Revision 1 - MAY 2023
133
USER RELAYS - PROGRAMMING PROCEDURE
Table 9. User-Programmable User Relays - Function Options
No�
Name
Description
41 Test Open Pulse
Output pulses five seconds after close limit is activated. Typically
used for cycle testing.
42 Break-Away Switch
output
Activates when the arm break-away switch is tripped.
43 Warn Before
Combination of relays #5 and #16.
44 Partial Open Limit Pulse
Pulses for 250ms when the gate, commanded with Partial Open
input, reaches Partial Open Limit, or, the gate is past Partial Open
Limit and Partial Open input is activated.
45 Outside Obstruction/
Arming Loop Detector
Activated when OOLD/OALD detector input tripped and gate
closed. Used for testing purposes.
Summary of Contents for ALPHA
Page 167: ...Figure 47 Schematic for Kinetic DC 15 Kinetic 1 and Kinetic DC 10F Kinetic 2 Operator s...
Page 168: ......
Page 170: ......
Page 180: ......