Page 1: ...and Systems Flowchart 4 1 Prepare the iLook camera walkera QR X350 RCI GPS altitude hold system O Install the Landing gear 1 4 Install the left skid carefully pull the cable throu the hole in the landing gear 1 5 Secure the landing gear with 2 screws tighten firmly with your fingers do not use tools 1 6 Connect compass 1 7 Secure the cable by pushing it under the clip on the compass mounting part ...
Page 2: ...ht should be blinking 2 or more times indicating 7 or more satelites locked Position Hold REQUIREMENT SOLID GPS lock GPS indicator should be blinking 2 times or more REQUIREMENT IMU must be calibrated the throttle elevator aileron and rudder trim should be at neutral positions Engage Position Hold while flying in manual mode move the MIX to 1 position do not move other stick this will cause the QR...