43
44
7.8 <Multi> Mode: Stroboscopic Operation
To achieve an ideal shooting effect, please only use a single light in stroboscopic
mode.
Select <Multi> mode:
Press and hold the [MODE] button for 3 s, and set the
radio transmitter to <Multi>.
Select group:
Briefly press the [GROUP] button to select group A, B or C
Set up flash output power for selected group:
Briefly press the [MODE] but
-
ton; the triangle points to <M 1/x>. Flash output power is selectable from 1/4 to
1/128. Rotate the dial to set the power.
Set up flash frequency for selected group:
Briefly press the [MODE] button;
the triangle points to Hz. Flash frequency is variable from 1 to 100 Hz. Rotate
the dial to set the correct frequency.
Set up number of flashes for selected group:
Briefly press the [MODE]
button; the triangle points to the number of flashes. The number of flashes is
variable from 1 to 100. Rotate the dial to set the correct number of flashes.
Flash output
power
Summary of Contents for Operator TTL T-N
Page 26: ...51 52...
