26
Group 3 (3. LED from top must light)
Group 4 (4. LED from top must light)
NOTE
Flash settings can only be made if the settings between transmit-
ter and receiver in the flash unit are matching. The test button on
the transmitter can be actuated at any time and will trigger a flash.
6.2 Mounting the transmitter to the camera
1. Plug the transmitter with its shoe on the
flash socket of your camera.
2. Should your camera not have a hot
shoes contact, you should use the at-
tached cable to connect the transmitter
with your cameras or the hot shoe.
7. Operating the devices
Press the test button
Before starting work you should check the function of the device and
trigger your flash by pressing the test button on the transmitter.
