UDB100x(UDB100xS) series direct digital synthesis signal generator use DDS technology
and FPGA design with the characters of high stability and low distortion ect., with the function of
TTL output and 60MHz frequency meter, UDB100xS series have sweep function, the start and end
frequency and sweep time can be set at will. It’s the ideal equipment of electronic engineer, laboratory,
production lines, the teaching and scientific research.
Main technology data
●
Signal Output function
Output waveforms Sine wave, Square wave and Triangle wave
Output amplitude
≥9Vp-p (signal output, no load)
（
MAX
）
About 0.1Vp-p (MIN)
Output impedance
50Ω±10%(signal output)
DC offset
±2.5V(no load)
Display
LCD1602
Frequency range
0.01Hz ~ 2MHz(UDB1002)
0.01Hz ~ 3MHz(UDB1003)
0.01Hz ~ 5MHz(UDB1005)
Resolution
0.01Hz(10mHz)
Frequency Stability
±1
×10
－
6
Frequency accuracy
±5×
10
－
6
Sine wave distortion
≤
0.8% (reference frequency is 1kHz)
Trinagle linearity
≥98% (0.01Hz~10kHz)
Rise and fall time of square wave
≤100n
s
Square Wave Duty range 1%~99%(digital control mode)
●
TTL Output function
Frequency range
0.01Hz ~ 2MHz(
UDB1002 or UDB1002S
)
0.01Hz ~ 3MHz(
UDB1003 or UDB1003S
)
0.01Hz ~ 5MHz(
UDB1005 or UDB1005S
)
Amplitude >3Vp-p
Fan Out >20 TTL loads
●
COUNTER function
Counter Range 0-4294967295
Frequency Meter Range 1Hz~60MHz
Input Voltage Range 0.5Vp-p~20Vp-p
●
SWEEP function (as for UDB100xS series)
Frequency range
f
M1
to f
M2
Sweep time 1s~99s
●
Others function
Save and Load Parameter M0-M9(M0: default load)
The function introduction of front panel
