24
Positioning
ENG
4. Positioning
NOTICE
Material damage caused by wrong
handling.
Damage to the luminaire.
X
Do
not
move the joints beyond the
intended rotation angle.
Fig. 7: Correct positioning.
X
Place the luminaire in the required posi-
tion. While doing so, make sure that you
are not blinded by the light of the lumi-
naire and that the light is not reflected
by a a screen.
X
If you have mounted the luminaire on a
standing base: Make sure that the lumi-
naire and the standing base are aligned
in the same direction.
5. Connection
5.1 Connecting the luminaire to
the mains voltage
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X
Compare the mains voltage with the
nominal voltage and the frequency
specified on the rating plate and
make sure that they are identical.
X
Connect the connecting cable of the
luminaire to the power supply unit.
X
Plug the power supply unit into a socket.
