23
Functional earth
The manufacturer cannot be held liable for damage caused by using the unit for purposes contrary
to the designated use or by ignoring safety instructions and warnings.
VDE Approval
CE
Conformity mark
ENEC Approval
SEV Approval
Important information!
Observe the disposal
instructions!
Safety or warning
instructions!
The light is suitable for
mounting on normally in-
flammable surfaces
LED
Light Emitting Diode
Intended purpose:
Machine light - light to be mounted
on machines
Place of use:
Exclusively suited for rooms not
subject to explosion hazards.
Suitable for wet locations.
The ambient temperature T
Amax
must not exceed 50°C.
Not for use in the range of action
of high-performance lasers.
Operating mode:
The light is designed for continuous
operation.
Unit corresponds to inter-
national protection class III
(Operation with savety
extra low voltage (SELV))
Designated use
Abbreviations and symbols
Instructions For Use Machine Light MVAL 1 S(D)
“ONE LED”
ENG
ETL approval
(USA/CAN)
Summary of Contents for ONE LED
Page 3: ...3 MVAL 1 S D ONE LED Fig 2 MVAL 1 S Fig 3 MVAL 1 SD...
Page 17: ...17 Anhang Gebrauchsanweisung Maschinenleuchte MVAL 1 S D ONE LED DEU...
Page 31: ...31 Appendix Instructions For Use Machine Light MVAL 1 S D ONE LED ENG...
Page 45: ...45 Annexe Mode d emploi Luminaire pour machine MVAL 1 S D ONE LED FRA...
