500.0001-D
2
Technical alterations reserved
1.3.
Regulations and insurance
For all safes with a net weight of less than 1000 kg, professional anchoring either during
construction or by the client is a minimum requirement of the EN1143-1 standard. For this
reason, all safes are equipped with 8 bore holes (4 on the back wall and 4 on the base)
with a diameter of 14.5 mm. If it is not possible to anchor the safe in accordance with
current regulations, the property insurance company must be informed and an alternative
solution must be found.
PLEASE NOTE:
The safe’s warranty and certification
terminate after attempted break-ins,
fires and unauthorised interference with the structure!
1.4.
Operating elements
Input unit
Handle
PLEASE NOTE:
The following instruction manual explains how to operate a safe with the
hinge on the right-hand side of the door! If you have a safe with the hinge on the left-hand
side of the door, all rotation, opening and closing movements must go in the opposite
direction!
1.5.
Set-up
The safe is delivered without a battery inserted as standard, meaning it can be opened
and closed without entering a code.
If the battery is inserted and the safe is locked when delivered, please follow the 500.0021/
500.0022 instruction manual.
