220.805.011
3
Date: 2021-12-09
−
Do not expose the winch to rain or moisture.
−
Refer any service operation not described in this manual to a qualified
technician.
PROTECTION FROM BURNS AND FIRE
−
Do not operate the winch if the ambient temperature exceeds 40° C (104° F).
−
The exterior of the winch becomes warm during use. Avoid contact by persons
and materials. Allow the winch to cool for at least 10 minutes before handling.
−
Do not modify the winch in any way not described in this manual.
−
Install only genuine Wahlberg Motion Design parts.
PROTECTION FROM INJURY
−
Fasten the winch securely to a fixed surface, rig, or structure when in use. The
winch is not portable when installed.
−
Ensure that any supporting structure and/or hardware can hold at least 10
times the weight of all the devices they support
−
If suspending from a rigging structure, fasten the winch using the supplied 4×
Manfrotto slim coupler according to the manual, see page 12.
−
Always install the winch as described in this manual. If the winch is installed in
a location where it may cause injury or damage if it falls, install as described in
on page 12.
−
If possible, allow enough clearance beneath the winch so it cannot cause any
danger to personnel beneath it. Alternatively, adjust the lower limit
accordingly following the instructions in this manual.
−
Check that all external cobblers and rigging hardware are securely fastened.
−
Block access below the work area and from a stable platform whenever
installing, servicing or moving the winch.
−
Do not operate the winch with missing or damaged covers, shields, or wire.
−
Do not use the winch over the head of people
−
Do not use the winch to lift people or animals.
−
Only use the winch to lift static loads.
Inspection
points
Intact wire
Broken wire
Before each use
−
Check that the winch is safely and correctly installed/mounted.
−
Inspect the entire length of the
wire
for bends, damage and
wear, cut cords, corrosion and abuse.
−
Inspect the
wire ferrule crimp
and
thimble
for damage, wear,
corrosion or abuse.
−
Check the load is safely mounted and weighs max. 25 kg (55.1 lb).
−
Check safety functions (limit switches, slack detection,
emergency stop)
−
Check that the wire is wound neatly on the drum
Warning! Do not use the winch if any damage or error is found!
Summary of Contents for Winch 25
