23
805.281.001
Date: March 22
rd
, 2017
Service and Maintenance
Warning! Read “Safety Information” on page 2 before servicing the Rotator 281.
Warning! Disconnect the Rotator from AC mains power and allow cooling down for at least 10
minutes before handling.
Warning! Disconnect the attachment connection from AC mains power before handling.
Warning! Refer any service operation not described in this user manual to a qualified service
technician.
Attention! Interval of inspections should be determined according to the frequency of use and
the working scenario of the rotator.
Attention! Signs of malfunction or poor operation should always lead to an inspection of the
rotator, and the rotator should be taken out of operation until the error is eliminated.
Maintenance plan
The results of all the regular inspections are to be documented and kept available at the
company. The written result of the last inspection must be kept available at the site of
operation, e.g. by an inspection sticker on the rotator showing the date of the inspection, the
basis of the inspection and the name of the inspector.
Before every use and weekly
Every time when rigging the rotator, before running the rotator – and at least every week when
the rotator is in use:
Ensure that the rotator is correctly and safely mounted
Ensure that the attached load is correctly mounted
Monthly
At regular intervals – but at least every month when the rotator is in use:
Check the mounting clamp and snap hook for damages and proper fastening.
Check the secure fastening of the attached lamp or electronic equipment
Check the electric fastening of the lamp.
Change damaged parts according to this manual.
Yearly
The rotator has to be inspected by a specialist every 12 months.
Every 48 months
The rotator should be inspected by an authorised expert every 48 months.
