© WAHL CLIPPER CORPORATION
Sterling, IL USA
FORM #93255-500
Printed in USA
1. Attach the power cord plug into the large adapter end.
2. Insert the small adapter end into jack located on the back of the clipper charge stand.
ADAPTER ONLY TO BE USED WITH WAHL CLIPPER CHARGE STAND. CHARGE STAND ONLY TO BE
USED WITH WAHL CORD/CORDLESS CLIPPERS AND POWER SUPPLIES.
CLIPPER CHARGE STAND ADAPTER USE INSTRUCTIONS
WHEN TO USE THE ADAPTER
If your WAHL cord/cordless clipper has model #ZD018B040200 or model #S010AZM0400200 power cord,
you will need to use the adapter. (Refer to Figure A)
If your WAHL cord/cordless clipper has model #ZDO18B050200 power cord, you do not need the adapter.
(Refer to Figure A)
WHEN NOT TO USE THE ADAPTER
MODEL#
FIGURE A
INSTRUCCIONES DE USO DEL ADAPTADOR DE BASE
DE CARGA DE LA CORTADORA
INSTRUCTIONS D’UTILISATION DE L’ADAPTATEUR
DE SUPPORT DE CHARGE DE LA TONDEUSE
