126 Configuring via the Web-Based Management System (WBM)WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
Manual
Version 1.3.0
Pos: 69.58 /Serie 750 ( WAGO-I/O-SYST EM)/Web-Based-M anagement-System WBM/Seite F eatur es/F eatur es - Einl eitung @ 4\mod_1242635282062_21.docx @ 33442 @ 2 @ 1
9.9
Features
Use the “Features” WBM page to enable or disable additional functions.
Pos: 69.59 /Serie 750 ( WAGO-I/O-SYST EM)/Web-Based-M anagement-System WBM/Seite F eatur es/F eatur es - Bild (750- 829, 831, 880, 881, 882, 885, 852, 352) @ 8\mod_1276864252513_21.docx @ 58171 @ @ 1
Figure 50: WBM Page “Features”
Pos: 69.60 /Serie 750 ( WAGO-I/O-SYST EM)/Web-Based-M anagement-System WBM/Seite F eatur es/F eatur es - T abell e (750-829, -831, - 88x, - 852) @ 6\mod_1265211909421_21.docx @ 49258 @ @ 1
Table 42: WBM Page “Features”
Additional Functions
Entry
Default
Description
Autoreset on
system error
Enables an automatic software reset to be conducted
when a system error occurs
Disables an automatic software reset to be conducted
when a system error occurs
BootP Request
before Static-IP
Automatically set the static IP address enabled.
For this configuration, the fieldbus coupler/
controller uses a statically configured IP address if the
request via BootP fails.
Automatically set the static IP address disabled.
For this configuration, the IP address request via BootP
is repeated in the event of error.
Non-adaptive Kbus
speed active
Disable the rate adjustment of the local bus for short
fieldbus nodes. With short fieldbus nodes, doing so
makes more computing power available for the PLC
application. The local bus rate is correspondingly
lower.
Enables the rate adjustment of the local bus.
Pos: 69.61 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
