26
Device Description
WAGO-I/O-SYSTEM 750
750-657 IO-Link Master
Manual
Version 1.0.2, valid from FW/HW-Version 02/01
Pos: 44 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Gerätebeschreibung/Technische Daten - Überschrift 2 @ 3\mod_1232967587687_21.doc @ 26924 @ 2 @ 1
4.5
Technical Data
Pos: 45 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Technische Daten/Sonderklemmen/Technische Daten 750-0657 @ 5\mod_1253082338140_21.doc @ 41662 @ 3333 @ 1
4.5.1
Device Data
Table 8: Technical Data – Device
Width 12
mm
Height (from upper edge of DIN 35 rail) 64 mm
Length 100
mm
Weight
Approx. 55 g
Operating temperature
0 °C ... +55 °C
Storage temperature
-25 °C ... +85 °C
Relative air humidity
(operation/storage)
95 % (without condensation)
Degree of protection
IP 20
4.5.2
Supply
Table 9: Technical Data – Supply
Voltage supply
system voltage
5 V via internal data bus,
24 V via power jumper contacts
Current consumption, system voltage
typ.
(5 V DC)
40 mA
Current consumption
max.
(24 V DC)
1250 mA (50 mA internal power supply
field side + 4 x 100 mA output current
from C/Q + 4 x 200 mA supply voltage
L+ of the devices)
Voltage via power jumper contacts
24 V DC (supply e.g. via 750-625)
Current via power jumper contacts
max.
10
A
Power consumption P
max.
1,2 W
Isolation (peak value)
500 V DC system/supply
4.5.3
Communication
Table 10: Technical Data – Communication
Data width, internal
4..24 Byte configurable
Transmission modes IO-Link
(Master/Devices)
4,8 kbaud (COM1)
38,4 kbaud (COM2)
230,4 kbaud (COM3)
Diagnostic information
Internal bus status via status byte,
event codes via acyclic channel
