manualshive.com logo in svg

WAGO WAGO-I/O-SYSTEM 750-476, Manual, Page: 24 / 48

Share
Download
WAGO WAGO-I/O-SYSTEM 750-476 Manual Download Page 24

24 

Device Description 

WAGO-I/O-SYSTEM 750 

 

 

750-476 2AI ±10V DC S.E. 

 

Manual 

 

Version 1.1.0  

Pos: 48 /Alle Serien (Allgemeine Module)/Überschriften/Neue Überschriften/Ebene 2Zulassungen - Überschrift 2 @ 3\mod_1224055364109_21.docx @ 24030 @ 2 @ 1 

 

3.7 

Approvals 

Pos: 49 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Zulassungen/Information: Weitere Informationen zu Zulassungen 750-xxxx @ 3\mod_1227190967156_21.docx @ 25221 @  @ 1 

 

 

 

 

More information about approvals. 

Detailed references to the approvals are listed in the document “Overview 

Approvals 

WAGO-I/O-SYSTEM 750

”, which you can find via the internet 

under: 

www.wago.com

 > SERVICES > DOWNLOADS > Additional 

documentation and information on automation products > WAGO-I/O-SYSTEM 

750 > System Description. 

 

Pos: 50 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Zulassungen/Allgemein/Zulassungen Busklemme 750-xxxx Allgemein, ohne Variantenangabe - Einleitung @ 4\mod_1237460656921_21.docx @ 28643 @  @ 1 

 

The following approvals have been granted to 750-476 I/O modules: 

Pos: 51.1 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Standardzulassungen/CE (Konformitätskennzeichnung) @ 3\mod_1224494777421_21.docx @ 24276 @  @ 1 

 

 

Conformity Marking 

 

Pos: 51.2 /Alle Serien (Allgemeine Dokumente) (Allgemeine Module)/Zulassungen/Standardzulassungen/cULus (UL508) @ 3\mod_1224055013140_0.docx @ 24020 @  @ 1 

 

 

C

UL

US

 

UL508 

 

Pos: 51.3 /Dokumentation allgemein/Gliederungselemente/------Leerzeile------ @ 3\mod_1224662755687_0.docx @ 24460 @  @ 1 

 

 

Pos: 52 /Alle Serien (Allgemeine Module)/Zulassungen/Standardzulassungen/KC - Korea Certificate - AI @ 20\mod_1406533217893_21.docx @ 160376 @  @ 1 

 

 

Korea Certification   

MSIP-REM-W43-AIM750 

 

Pos: 53 /Dokumentation allgemein/Gliederungselemente/------Leerzeile------ @ 3\mod_1224662755687_0.docx @ 24460 @  @ 1 

 

 

Pos: 54 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Zulassungen/Ex/Zulassungen Busklemme 750-xxxx Ex, ohne Variantenangabe - Einleitung @ 4\mod_1237191218000_21.docx @ 28423 @  @ 1 

 

The following Ex approvals have been granted to 750-476 I/O modules: 

Pos: 55 /Alle Serien (Allgemeine Module)/Zulassungen/Ex-Zulassungen/cULus/cULus (ANSI/ISA 12.12.01) Class I, Div2 ABCD T4 @ 3\mod_1224054791812_0.docx @ 24014 @  @ 1 

 

 

C

UL

US

 

ANSI/ISA 12.12.01 

Class I, Div2 ABCD T4 

 

Pos: 56 /Alle Serien (Allgemeine Module)/Zulassungen/Ex-Zulassungen/TÜV ATEX/TÜV 07 ATEX 554086 X: I M2 Ex d I Mb II 3 G Ex nA IIC T4 Gc II 3 D Ex tc IIIC T135°C Dc @ 14\mod_1361949753233_0.docx @ 113015 @  @ 1 

 

 

TÜV 07 ATEX 554086 X 
I M2 Ex d I Mb  

II 3 G Ex nA IIC T4 Gc  

II 3 D Ex tc IIIC T135°C Dc 

 

Pos: 57 /Alle Serien (Allgemeine Module)/Zulassungen/Ex-Zulassungen/IECEx (TÜV Nord)/IECEx TUN 09.0001 X: Ex d I Mb Ex nA IIC T4 Gc Ex tc IIIC T135°C @ 14\mod_1361950034299_0.docx @ 113019 @  @ 1 

 

 

IECEx TUN 09.0001 X 
Ex d I Mb  

Ex nA IIC T4 Gc  

Ex tc IIIC T135°C Dc 

 

Pos: 58 /Alle Serien (Allgemeine Module)/Zulassungen/Ex-Zulassungen/Sonstige/Brasilian Ex TUEV 12.1297 X Ex nA IIC T4 Gc @ 16\mod_1379922057421_0.docx @ 132410 @  @ 1 

 

Brasilian- 

Ex 

TUEV 12.1297 X  

 

Ex nA IIC T4 Gc 

 

Pos: 59 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @  @ 1 

 

 

 

Summary of Contents for WAGO-I/O-SYSTEM 750-476

















































Reviews:

No comments