manualshive.com logo in svg

WAGO WAGO-I/O-IPC-C6, Manual, Page: 315 / 322

Share
Download
WAGO WAGO-I/O-IPC-C6 Manual Download Page 315

WAGO-I/O-SYSTEM 750 

List of Figures  315 

758-874/000-131 WAGO-I/O-IPC-C6 

 

 

Manual 

 

Version 1.0.0  

 

Pos: 77 /Dokumentation allgemein/Verzeichnisse/Abbildungsverzeichnis - ohne Gliederung - und Verzeichnis @ 3\mod_1219222916765_21.doc @ 21080 @  @ 1 

 

List of Figures 

Figure 1: Overview of interfaces........................................................................... 21 
Figure 2:  LEDs ..................................................................................................... 23 
Figure 3: Operating elements ................................................................................ 24 
Figure 4: Battery.................................................................................................... 26 
Figure 5: Lateral marking on the I/O-IPC ............................................................. 27 
Figure 6: RJ-45 Geode .......................................................................................... 33 
Figure 7: Interface X3 ........................................................................................... 35 
Figure 8: Connection of integrated inputs............................................................. 37 
Figure 9: Connection of integrated outputs........................................................... 38 
Figure 10: USB Interface ...................................................................................... 39 
Figure 11: RS-232 Serial Interface........................................................................ 40 
Figure 12: DVI-I Interfave .................................................................................... 42 
Figure 13: Mounting directions for the I/O-IPC; recommended mounting direction 

(A 1) ............................................................................................................. 44 

Figure 14: Securing of the I/O-IPC to a mounting rail.......................................... 45 
Figure 15: Connecting an I/O module to the I/O-IPC connecting clamp.............. 47 
Figure 16: I/O-IPC interfaces ................................................................................ 48 
Figure 17: Removing the I/O-IPC from the mounting rail.................................... 49 
Figure 18: 750-602 ................................................................................................ 52 
Figure 19: Power Supply via 750-602 up to HW 10 (with fieldbus) .................... 54 
Figure 20: Power Supply via 750-602 as of HW 11 (with fieldbus)..................... 55 
Figure 21: Power Supply via 750-626 (with fieldbus) .......................................... 57 
Figure 22: Configuration line in the configuration file ......................................... 62 
Figure 23: Dialog window of the WAGO BootP Server with messages .............. 64 
Figure 24: Start screen of the WAGO IPC configuration tool .............................. 65 
Figure 25: TCP/IP ................................................................................................. 65 
Figure 26: TCP/IP configuration eth0 (X8) .......................................................... 66 
Figure 27: IP address............................................................................................. 66 
Figure 28: Enter new address ................................................................................ 67 
Figure 29: Example of a functional test ................................................................ 68 
Figure 30: Switch off/restart of the I/O-IPC ......................................................... 69 
Figure 31: Entering the authentication .................................................................. 71 
Figure 32: "Information" page (Example)............................................................. 73 
Figure 33: Access to the IPC Configuration Tool using Telnet ............................ 89 
Figure 34: Start screen of the WAGO IPC configuration tool .............................. 90 
Figure 35: Adaptation of the remanent memory area.......................................... 101 
Figure 36: Target Settings (1) ............................................................................. 104 
Figure 37: Target Settings (2) ............................................................................. 104 
Figure 38: Designing a new function block ........................................................ 105 
Figure 39: Programming interface with the program function block PLC_PRG 105 
Figure 40: "Resources" tab" ................................................................................ 106 
Figure 41: PLC configuration: Appending sub-elements.................................... 107 
Figure 42: I/O configuration 1............................................................................. 107 
Figure 43: I/O configuration 2............................................................................. 108 
Figure 44: PLC configuration: I/O module with the associated addresses ......... 109 
Figure 45: PLC configuration with symbolic names........................................... 109 
Figure 46: Program function block ..................................................................... 110 
Figure 47: Input assistant for selecting variables ................................................ 110 

Summary of Contents for WAGO-I/O-IPC-C6



































































































































































































































































































































Reviews:

No comments