manualshive.com logo in svg

WAGO WAGO-I/O-IPC-C6, Manual, Page: 20 / 322

Share
Download
WAGO WAGO-I/O-IPC-C6 Manual Download Page 20

20 

Device Description 

WAGO-I/O-SYSTEM 750 

  

758-874/000-131 

WAGO-I/O-IPC-C6 

 

Manual 

 

Version 1.0.0  

 

Pos: 32.10 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Beschreibung 758-87x 7 @ 10\mod_1314705431129_21.doc @ 77815 @  @ 1 

 

The I/O-IPC provides 256 MB of program and data memory and 1023 kB of non-
volatile memory.  

Pos: 32.11 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Beschreibung 758-87x 7 allgemein @ 10\mod_1312353687066_21.doc @ 75613 @  @ 1 

 

Both clients and servers for TCP or UDP can be programmed via function blocks. 

An internal server is available for Web-based applications. Information regarding 
the configuration and status of the I/O-IPC, among other things, is already stored 
as dynamic HTML pages in the I/O-IPC and can be read via Internet browser. In 
addition, you can also save your own HTML pages or call up programs directly 
via an implemented file system. 

The firmware installed at delivery is based on Linux with special real-time 
extensions of the RT-Preempt patch. In addition, various user programs are 
already installed on the I/O-IPC. These include, for example: 

• 

a Snmp server, 

• a 

Telnet 

server, 

• 

a FTP server (supports simultaneously two ftp connections), 

• 

an NTP client, 

• 

a BootP and DHCP daemon and 

• 

the CoDeSys runtime environment and other different help programs. 

Pos: 32.12 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @  @ 1 

 

Summary of Contents for WAGO-I/O-IPC-C6



































































































































































































































































































































Reviews:

No comments