manualshive.com logo in svg

WAGO WAGO-I/O-IPC-C6, Manual, Page: 190 / 322

Share
Download
WAGO WAGO-I/O-IPC-C6 Manual Download Page 190

190  Operating System 

WAGO-I/O-SYSTEM 750 

  

758-874/000-131 

WAGO-I/O-IPC-C6 

 

Manual 

 

Version 1.0.0  

Additional programs are also installed on the I/O-IPC, such as, for example, 

cp 

or 

ftp. 

Moreover, the programs listed in section “Installed applications” are also 

included, such as the following help programs (examples): 

• htop, 

top 

Program for displaying priorities and used resources individual processes. 

• sed 

Help program for the simple parsing of text/configuration files. 

• gdbserver 

Remote debugger 

• cyclictest 

Measurement program for recording the real-time capability of the system. 

• zip, 

unzip 

For packing and unpacking zip archives. 

Summary of Contents for WAGO-I/O-IPC-C6



































































































































































































































































































































Reviews:

No comments