4 •
Important Notes
Legal
Principles
WAGO-I/O-IPC
1 Important Notes
To ensure fast installation and start-up of the units described in this manual,
we strongly recommend that the following information and explanations are
carefully read and adhered to.
1.1 Legal Principles
1.1.1 Copyright
This manual including all figures and illustrations contained therein is subject
to copyright. Any use of this manual which infringes the copyright provisions
stipulated herein, is not permitted. Reproduction, translation and electronic
and reproductional archiving and amendments require the written consent of
WAGO Kontakttechnik GmbH & Co. KG, Minden. Non-observance will
entail the right of claims for damages.
WAGO Kontakttechnik GmbH & Co. KG reserves the right of changes
serving technical progress. All rights developing from the issue of a patent or
the legal protection of utility models are reserved to WAGO Kontakttechnik
GmbH & Co. KG. Third-party products are always indicated without any
notes concerning patent rights. Thus, the existence of such rights must not be
excluded.
1.1.2 Personnel
Qualification
The use of the product described in this manual is exclusively geared to
specialists having qualifications in PLC programming, electrical specialists or
persons instructed by electrical specialists who are also familiar with the
appropriate applicable standards. WAGO Kontakttechnik GmbH & Co. KG
declines any liability resulting from improper action and damage to WAGO
products and third party products due to non-observance of the information
contained in this document.
1.1.3 Intended
Use
For each individual application, the components are supplied from the factory
with a dedicated hardware and software configuration. Modifications are only
admitted within the framework of the possibilities documented in the manuals.
All other changes to the hardware and/or software and any use of the
components that is not in accordance with the intended use entail the
exclusion of liability on the part of WAGO Kontakttechnik GmbH & Co. KG.
Please direct any requirements pertaining to a modified and/or new hardware
or software configuration directly to WAGO Kontakttechnik GmbH & Co.
KG.