manualshive.com logo in svg

WAGO PERSPECTO VP Visu-Panel 762, Manual, Page: 2 / 50

Share
Download
WAGO PERSPECTO VP Visu-Panel 762 Manual Download Page 2

2 Imprint 

WAGO-PERSPECTO 

762 

 

 

762-2035, -2057, -2104, -2121, -2150 PERSPECTO VP, Visu-Panel 

 

Imprint 

© 2010 by WAGO Kontakttechnik GmbH & Co. KG 
All rights reserved. 

 

WAGO Kontakttechnik GmbH & Co. KG 

Hansastraße 27 
D-32423 Minden 

Tel.: 

+49 (0) 571/8 87 – 0 

Fax: 

+49 (0) 571/8 87 – 1 69 

E-mail: [email protected] 

Web: http://www.wago.com 

 

Technical Support 

Tel.: 

+49 (0) 571/8 87 – 5 55 

Fax: 

+49 (0) 571/8 87 – 85 55 

E-mail: [email protected] 

 

 

 

 

Every conceivable measure has been taken to ensure the accuracy and 
completeness of this documentation. However, as errors can never be fully 
excluded, we always appreciate any information or suggestions for improving the 
documentation. 

E-mail: [email protected] 

We wish to point out that the software and hardware terms as well as the 
trademarks of companies used and/or mentioned in the present manual are 
generally protected by trademark or patent. 

 

 

 

Manual 

 

Version 1.0.0  

Summary of Contents for PERSPECTO VP Visu-Panel 762



















































Reviews:

No comments