212 •
I/O Modules
Configuration and Parameter Setting of the Modules
WAGO-I/O-SYSTEM
750
PROFINET IO
5.3.5.8 DALI/DSI
Master
Instances
PNIO
Module type
Module type member
PNIO-Data type
Input
Output
DALI/DSI
75x-641
Unsigned 8
OctetString [5]
1 1
Inputs
Bit allocation
PNIO
Module type
Length
[Bit]
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
Note
PD
RA
-
Status 0 / Register RES
Channel 0 / Table 0
Input data channel 0 Byte
0
Register date RD
Table 0, LB
Input data
channel 0 Byte 1
Register date RD
Table 1, HB
Input data
channel 0 Byte 2
Input data
channel 0 Byte 3
Input data
channel 0 Byte 4
6
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
PD
RA
RW
Control 0 / Register REQ
Channel 0 / Table 0
Output data
channel 0 Byte 0
Register date WR
Table 0, LB
Output data
channel 0 Byte 1
Register date WR
Table 1, HB
Output data
channel 0 Byte 2
Output data
channel 0 Byte 3
Output data
channel 0 Byte 4
DALI/DSI
6
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
6 bytes are applied in the input and output
process image of the station proxy (fieldbus
coupler) by fitting the slot with this module
and are allocated to the physical module.
This module enables access to the register
structure of the I/O module for configuration
purposes. Two byte process data qualifiers
(IOPS, IOCS) are managed in the direction
of the I/O controller in the cyclic PROFINET
IO telegram for this module.
Parameter
Value
Significance
Asynchronous diagnostic
message
channel x
The following occurs per diagnostics data sets and
diagnostics alarm when the receiver buffer overfills
locked*)
•
not transferred to the I/O Controller
released
•
transferred to the I/O Controller
*) Default settings
