PROFINET IO 750-340
•
93
Diagnostics
WAGO-I/O-SYSTEM 750
PROFINET IO
Byte
offset
Data type
Description
14 / 15
WORD
0x00
0x01
Sub-module slot with target and actual deviation
16 / 17
0x00
0x00
10 / 11
DWORD
0x00 0x00
Identification of the physically connected sub-module
= 0
12 / 13
WORD
Sub-module status
0x0000 no sub-module is connected
0x0001 Physically connected and configured
sub-module do not correspond
0x0002 Sub-module is locked by the I/O
controller
0x0003 reserved
0x0004 one application is accessing the sub-
module
0x0005 reserved
0x0006 reserved
0x0007 Physically connected and configured
sub-module do not correspond but are
compatible
0x0008
...
0xFFFF
reserved
The sub-module data sets follow direct one after another. Their number is
stored in the head structure. The next module data set follows after the sub-
module data sets.
3.1.7.2.4
Data Set for Identification and Servicing Purposes (I&M 0)
This data set allows to read the device information that may be required for
the system documentation and for service purposes.
Byte
offset
Information
Description
0 0x00 0x20 Block
type
2
0x00
0x38 Block length = 56 Byte
4
0x01
0x00 Block version 1.0
6 0x01 0x1D Manufacturer ID WAGO
285
D
8
0x37 0x35
10
0x30 0x2D
12
0x33 0x34
14
0x30
0x20
16 0x20 0x20
... ... ...
26 0x20 0x20
WAGO order number
filled out with spaces
„
750-340
“
28
0x30 0x30
30
0x33 0x30
32
0x44 0x45
MAC-ID WAGO filled out with spaces
“
0030DE
KLMNOP
”