WAGO I/O System 750
Properties
29
750-8210/040-000 PFC200; G2; 4ETH; XTR
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
4.1.3.2
Service Interface
The service interface is located behind the flap.
The Service interface is used for communication with WAGO-I/O-
CHECK
and
“WAGO Ethernet Settings”.
Figure 4: Service Interface (Closed and Open Flap)
Table 5: Service Interface
Number
Description
1
Open flap
2
Service interface
Device must be de-energized!
To prevent damage to the device, unplug and plug in the communication cable
only when the device is de-energized!
The connection to the 4-pin header under the cover flap can be realized via the
communication cables with the item numbers750-920 and 750-923 or via the
WAGO radio adapter with the item number 750-921.
