226 Appendix
WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
“IPsec” Group
Table 131
: WBM “OpenVPN / IPsec Configuration” Page – “IPsec” Group
Parameter
Explanation
Current State
The current status of the IPsec service is displayed.
stopped
The service is disabled.
running
The service is enabled.
IPsec enabled
Enable or disable the IPsec service.
ipsec.conf
Select an IPsec configuration file to be transferred
from PC to product or vice versa.
ipsec.secrets
Select an IPsec configuration file to be transferred
from PC to product or vice versa.
Click the
[Submit]
button to apply a change.
To select a file on the PC, click the
Choose file …
selection field.
To transfer the selected file from the PC to the product, click
[Upload]
button.
To transfer a file from product to PC, click the
[Download]
button.
The changes only take effect after the product restarts. For this purpose, use the
WBM reboot function. Do not switch off the product too early!
