manualshive.com logo in svg

WAGO I/O-SYSTEM 750, Manual, Page: 37 / 450

Share
Download
WAGO I/O-SYSTEM 750 Manual Download Page 37

WAGO-I/O-SYSTEM 750 

System Description  37 

750-882 Media Redundancy ETHERNET Controller 

 

 

 

Manual 

 

1.5.0  

3.6.4.3  Fusing external 

 

 

 

Field supply only with appropriate fuse protection! 

Without overcurrent protection, the electronics can be damaged.  

If you alternatively implement the overcurrent protection for the field supply with 

an external fuse, an F 10 A fuse should be used. 

For the external fusing, the fuse modules of the WAGO series 282, 2006, 281 

and 2002 are suitable for this purpose.  

 

Figure 13: Fuse Modules for Automotive Fuses, Series 282 

 

 

Figure 14: Fuse Modules for Automotive Fuses, Series 2006 

 

Figure 15: Fuse Modules with Pivotable Fuse Carrier, Series 281 

 

Summary of Contents for I/O-SYSTEM 750



































































































































































































































































































































































































































































Reviews:

No comments