134 Programming the PFC Using WAGO-I/O-PRO
WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
Manual
1.5.0
9.2
ETHERNET Libraries for WAGO-I/O-
PRO
Various libraries are available in WAGO-I/O-
PRO
for different IEC 61131-3
programming tasks. These libraries contain function blocks that can be used
universally to facilitate and accelerate the creation of programs.
Once the libraries have been integrated, function blocks, functions and data
types will be available that you can use the same as ones you have specifically
defined.
Additional Information
All libraries are included on the installation CD for the software WAGO-I/O-
PRO
The libraries described below are specific to ETHERNET projects with WAGO-
I/O-
PRO
.
Table 37: ETHERNET libraries for WAGO-I/O-
PRO
Library
Description
WAGOLibEthernet_01.lib
Function blocks that can set up a link to a remote server or
client via TCP protocol to exchange data with any potential
UDP server or client via UDP protocol
WAGOLibModbus_IP_01.lib
Function blocks that set up links with one or more slaves
SysLibSockets.lib
Function block for access to sockets for communication via
TCP/IP and UDP.
WagoLibSockets.lib
Function blocks for access to sockets for communication
via TCP/IP and UDP
Contains additional functions in addition to SysyLibSockets.lib.
WAGOLibMail_02.lib
Function block for sending e-mails
WagoLibFtp.lib
Function blocks for setting and using the file transfer protocol
(FTP)
WAGOLibTerminalDiag.lib
Function blocks for the output of module, channel and diagnostic
data of I/O modules that provide diagnostic data
Additional Information
For a detailed description of the function blocks and use of the software, refer to
the online Help function for WAGO-I/O-
PRO
or the WAGO-I/O-
PRO
manual in
the Internet under: