WAGO EPSITRON 787-1668 Series Manual Download | Manualshive

Page: 15 / 48

background image

EPSITRON®

Device Description

15

787-1668 Electronic Circuit Breaker

Manual

Version 1.1.0

Pos : 23 /All e Seri en (Allgemei ne Module)/Ü berschrif ten f ür alle Serien/G erätebesc hreibung/Ansc hlüsse - Übersc hrift 2 @ 4\ mod_1240984262656_21. doc x @ 31961 @ 2 @ 1

3.2

Connectors

Pos : 24.1 /Serie 787 (EPSITRON)/ Wic htige Erläut erungen/ Sicher heits- und s ons tige Hi nweis e/ Ac ht ung/ Ac htung: F ederl eist en nic ht unt er Las t st ec ken oder zi ehen! @ 18\ mod_1392900217463_21.doc x @ 145941 @ @ 1

Do not plug in or disconnect the female connector while a load is applied!

Only plug in or disconnect the female connectors when the device is not live!
Failure to observe this can result in damage to the contacts due to arcing!

Pos : 24.2 /Serie 787 (EPSITRON)/ Wic htige Erläut erungen/ Sicher heits- und s ons tige Hi nweis e/ Ac ht ung/ Ac htung: F ederl eist en bis zum Ansc hlag i n die Stif tleis ten s tec ken! @ 18\ mod_1392902889021_21. doc x @ 145944 @ @ 1

Plug the female connectors all the way into the male connectors!

Always plug the female connectors all the way in to the male connectors. This
ensures proper contact at all times.

Pos : 24.3 /Serie 787 (EPSITRON)/ Wic htige Erläut erungen/ Sicher heits- und s ons tige Hi nweis e/ Ac ht ung/ Ac htung: Fr eisc hwingende Leit erenden durc h eine g eeignet e Z ugentl ast ung abf angen! @ 18\ mod_1392904262758_21. doc x @ 146008 @ @ 1

Attach the free ends of the conductors using a strain relief device!

Provide appropriate strain relief means to attach and cap any free ends of the
conductors. Female connectors can be pulled out of the male connectors by high
vibration levels or shock impacts.

Pos : 24.4 /Dokumentation allgemei n/ Glieder ungs elemente/------Leerz eile------ @ 3\ mod_1224662755687_0.doc x @ 24460 @ @ 1

Pos : 24.5 /Serie 787 (EPSITRON)/ Ger ät ebesc hrei bung/ Ans chl üss e/ Ans chl üss e 787-166x - Vers orgung @ 13\ mod_1345543912608_21. doc x @ 101785 @ 3 @ 1

3.2.1

Power supply

Table 6: Power supply connections

Figure 2: 24 V input

No.

Designation Function

1

+

24 V input voltage

2

+

24 V input voltage

Table 7: Power supply connections

Figure 3: 0 V input

No.

Designation Function

1

-

Reference potential 0 V

2

-

Reference potential 0 V

Pos : 24.6 /Serie 787 (EPSITRON)/ Wic htige Erläut erungen/ Sicher heits- und s ons tige Hi nweis e/ Ac ht ung/ Ac htung: Gesamtstrom auf z wei Ei ngangs klemmen auft eilen! @ 18\ mod_1392893598736_21. doc x @ 145938 @ @ 1

«
...
13
14
15
16
17
...
»

Summary of Contents for EPSITRON 787-1668 Series

















































Reviews:

No comments

Related manuals for EPSITRON 787-1668 Series

Brand: Eaton Pages: 76

Brand: Areva Pages: 41

Brand: Eaton Pages: 102

Brand: Eaton Pages: 2

Brand: GE Pages: 76

Brand: Siemens Pages: 4

Brand: Siemens Pages: 4

Brand: hager Pages: 2

Brand: hager Pages: 4

Invicta 3 JF8 B Series

Brand: hager Pages: 14

Brand: ABB Pages: 42

SACE Emax 2 - Tmax XT

Brand: ABB Pages: 11

Brand: ABB Pages: 60

SF6 LTB 245E1 BLG 1002A

Brand: ABB Pages: 231

Appleton EBR3023EH15

Brand: EGS Pages: 4

Brand: NCE Pages: 6

Enedis DPX 3 250AB

Brand: LEGRAND Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands