WAGO I/O System 750
List of Figures 19
750-940 EnOcean RS-485 Gateway; 868 MHz
Manual
Version 1.3.0, valid from FW/HW Version 01/01
3.2.1
2-Wire Modular PCB Connector
The external power supply is connected by two-conductor modular PCB
connectors.
Figure 6: Two-Conductor Modular PCB Conductors (Example)
Additional information is available in Sections “Technical Data” and “Connecting
Devices.”
3.2.1.1 Connection for the External Power Supply
The connection for the external SELV power supply is made through a 2-pole, 2-
wire modular PCB connector that accepts the individual single strand and is
plugged into the 2-pole PCB male header X1 of the EnOcean Gateway; see
Figure “Connections on the EnOcean Gateway.”
Figure 7: 2-Pole, 2-Wire Modular PCB Connector for Connecting the Power Supply
Table 6: Legend for Figure “2-Pole, 2-Wire Modular PCB Connector for Connecting the Power Supply
Position
Meaning
Description
1
V
CC
Power supply socket
2
GND
Socket for connecting power supply and RS-485
communication
