852-1328
Configuration in the WBM
68
Product manual | Version: 1.2.0
Industrial Managed Switch
Table 37: WBM "Security" tab – "Port Security Settings" tab
Parameter
Description
Port Security Global Setting
Global State
Select Global State to enable port security on the switch. Deselect Global State to dis-
able port security on the switch.
Port Security Settings
Port Range
Select the range of ports for which you want to enable/disable port security.
Port State
Enable or disable port security on the selected range of ports.
Maximum MAC
Select the maximum number of MAC addresses for the selected range of ports
10.6.5 VLAN
10.6.5.1 Port Isolation
Port Isolation is a port-based virtual LAN function. It partitions the switching ports into vir-
tual private domains designated on a per port basis. Data switching outside of the
switch's private domain is not allowed. VLAN tag information of the packets is ignored.
This function can be used to configure one or more egress ports that allow the data re-
ceived by the specific port to forward it.
If you want to allow communications between two subscriber ports, you must define the
egress port for both ports. By default, it forms a VLAN with all ETHERNET ports.
