852-1328
Configuration in the WBM
66
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 51: WBM “Security” Page – “802.1X” – “802.1X Port Setting” Tab
The webpage’s representation is divided into two parts. The upper part of the webpage
allows the setting of port(s) to be changed, while the lower part of the webpage is a table
displaying the current status of the authorization mode and the state of each port on the
managed switch. To enable the 802.1X security on any of the port(s), click one of the port
or press Ctrl key and click multiple ports on the list and choose the Authorization Mode
from the dropdown list and click the
[Update]
button. To check the latest status of the
802.1X port setting, user can click on the
[Refresh]
button.
Table 36: WBM “Security” Page – “802.1X” – „802.1X Port Setting” Tab
Parameters
Factory Default
Description
Port
Option
Set specific port(s) to be configured.
Mode
NO
Choices:
FU (Force Unauthorized):
Specify forced unauthorized
FA (Force Authorized):
Specify forced authorized
AU (Standard Authorization):
Specify authorization based on
IEEE 802.1X.
NO:
Specify disable authorization
10.6.4 Port Security
Port security is a security feature that makes it possible to link each port of a switch with a
specific number of MAC addresses so that communication is permitted only with autho-
rized MAC addresses. For this, the switch checks the sender MAC address each time a
link is established before any user data is transmitted.
