852-1328
Configuration in the WBM
54
Product manual | Version: 1.2.0
Industrial Managed Switch
Parameters
Factory Default
Description
Community String
Null
Enter the community string for authentication. The maximum
length of the string is 15 characters.
10.5.1.4 SNMP-V3-Auth.
As mentioned earlier, SNMP V3 is a more secure SNMP protocol. In this part, the user
will be able to set a password and an encryption key to enhance the data security. When
SNMP V3 is chosen, the users can configure SNMP V3’s authentication and encryption
parameters. MD5 (Message-Digest algorithm 5) is used for authentication password and
DES (Data Encryption Standard) is used for data encryption algorithm. Figure “WBM “Di-
agnostics” Page – “SNMP Tab”, SNMP V3 Auth.” shows the SNMP V3 Authentication
(Auth.) Setting options.
Figure 39: WBM “Diagnostics” Page – “SNMP Tab”, SNMP V3 Auth.
The users can view existing SNMP V3 users’ setting on the list at the upper part of SNMP
V3 Auth. Setting as shown in Figure “WBM “Diagnostics” Page – “SNMP Tab”, SNMP V3
Auth.”. The list provides information about user Name, Authentication type, and Data En-
cryption. The user have an option to remove existing SNMP V3 user by clicking on the
[Remove]
button in the last column of each entry.
